You have GRES enabled and the backup RE was not ready to takeover. See the message in the first lines.
Thanks On 2/15/12, Mohammad <masal...@gmail.com> wrote: > Hi everyone > > > > We have an MX960 with two routing engines, Re0: Backup, Re1: Master > > When we try to switchover to the backup RE we see the following message: > > XXX# run request chassis routing-engine master switch > > error: Standby Routing Engine is not ready for graceful switchover > (replication_err soft_mask_err) > > Toggle mastership between routing engines ? [yes,no] (no) > > Noting that we used to switchover between the two Res a day a before with no > issues!!!! > > > > Also, when we login to the re0 (backup) and check the isis, rsvp, etc… we > see the following: > > XXX> request routing-engine login other-routing-engine > > € > > --- JUNOS 10.2R3.10 built 2010-10-16 19:24:06 UTC > > {backup} > > XXX> show isis adjacency > > > > {backup} > > XXX> show rsvp session > > Ingress RSVP: 0 sessions > > Total 0 displayed, Up 0, Down 0 > > > > Egress RSVP: 0 sessions > > Total 0 displayed, Up 0, Down 0 > > > > Transit RSVP: 0 sessions > > Total 0 displayed, Up 0, Down 0 > > > > {backup} > > XXX> > > While we can see the bgp routes and L3VPN routes,,,!!!! > > We have tried to replace the backup with another one, but with the same > results > > Any ideas, this issue is really confusing us, and it is a very critical > router in our network. > > > > Thank you in advance > > Mohammad Salbad > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp -- Sent from my mobile device ./diogo -montagner _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp