Hello List, I have MX240 router (10.0 R4.7) with two peering links and two upstream links. I need separate accounting of customer's traffic: to/from upstreams and to/from peerings. I configured an SCU input accounting on peering and upstream links, DCU and SCU output accounting on customer's link:
minot...@br1-gdr.ki# show interfaces ae0 unit 753 vlan-id 753; family inet { accounting { source-class-usage { output; } destination-class-usage; } no-redirects; filter { output bw-100M-U; } address 109.68.41.133/30; } Then I applied export policy to forwarding table, now every route has an assigned class, for example: minot...@br1-gdr.ki# run show route juniper.net table Salt extensive | match class Destination class: to-Upstream Source class: from-Upstream Now let's check extensive information about customer's interface: minot...@br1-gdr.ki# run show interfaces ae0.753 extensive Logical interface ae0.753 (Index 97) (SNMP ifIndex 197) (Generation 168) Description: Downstream: Digital Screens Kurenevka Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.753 ] Encapsulation: ENET2 Statistics Packets pps Bytes bps Bundle: Input : 1355645712 10824 1744298393787 125788672 Output: 676249013 3535 50730352637 1954232 Link: ge-2/0/5.753 Input : 1355645712 10824 1744298393787 125788672 Output: 676249013 3535 50730352637 1954232 Marker Statistics: Marker Rx Resp Tx Unknown Rx Illegal Rx ge-2/0/5.753 0 0 0 0 Protocol inet, MTU: 1500, Generation: 198, Route table: 6 Flags: No-Redirects, DCU, SCU-out Packets Bytes Destination class (packet-per-second) (bits-per-second) to-Other 1966210 997515326 ( 9) ( 4129) to-Peering 904424 1216778711 ( 2932) ( 32529971) to-Upstream 0 0 ( 0) ( 0) Packets Bytes Source class (packet-per-second) (bits-per-second) from-Other 88128 5568059 ( 0) ( 53) from-Peering 534506 37189579 ( 1136) ( 664770) from-Upstream 16017 1066310 ( 97) ( 49421) Output Filters: bw-100M-U-ae0.753-o, Addresses, Flags: Is-Preferred Is-Primary Destination: 109.68.41.132/30, Local: 109.68.41.133, Broadcast: 109.68.41.135, Generation: 177 Protocol multiservice, MTU: Unlimited, Generation: 199, Route table: 6 Policer: Input: __default_arp_policer__ Why 'to-Upstream' counters are zeroes? Thanks in advance! -- MINO-RIPE _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp