Or just use BFD ... Thank you,
-- Doug Hanks - JNCIE-ENT #213, JNCIE-SP #875 Sr. Systems Engineer Juniper Networks On 5/29/12 4:54 AM, "Mark Tinka" <mark.ti...@seacom.mu> wrote: >On Tuesday, May 29, 2012 12:19:19 PM Wan Tajuddin Wan Hussin >wrote: > >> Has anyone deploy this type of setting and successfully >> integrate with Juniper without any issue. > >You'll quickly notice that many configurable timers in Cisco >are not available in Junos. However, this isn't a train- >wreck, and they inter-op fairly well. > >Juniper spend more time adding fast convergence into the >code without many options, while Cisco do the same but give >you lots of knobs (good and bad thing). > >Just make sure you tune your timers appropriately for your >network conditions, taking into account whether you >designing for link or node failure. > >Mark. >_______________________________________________ >juniper-nsp mailing list juniper-nsp@puck.nether.net >https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp