Hello the list,
I solve most of problems to ping from my SRX cluster. But now, I have a new problem, because I did a lot of changes: I don't have routing process on the cluster of site B. ================================ toto@BA-SRX650-01# show chassis cluster reth-count 6; redundancy-group 0 { node 0 priority 100; node 1 priority 1; } redundancy-group 1 { node 0 priority 100; node 1 priority 1; interface-monitor { ge-6/0/19 weight 255; ge-6/0/20 weight 255; ge-6/0/21 weight 255; ge-6/0/22 weight 255; ge-6/0/23 weight 255; ge-15/0/19 weight 255; ge-15/0/20 weight 255; ge-15/0/21 weight 255; ge-15/0/22 weight 255; ge-15/0/23 weight 255; ge-6/0/18 weight 255; ge-15/0/18 weight 255; } } ======================================== toto@BA-SRX650-01# run show chassis cluster status Cluster ID: 1 Node Priority Status Preempt Manual failover Redundancy group: 0 , Failover count: 0 node0 100 secondary no no node1 1 primary no no Redundancy group: 1 , Failover count: 0 node0 0 secondary no no node1 0 primary no no ============================ toto@BA-SRX650-01> show route all error: the routing subsystem is not running ============================ toto@BA-SRX650-01> restart routing error: Routing protocols process is not running error: Routing protocols process was not restarted ===================================== artere@BA-SRX650-01# run show chassis alarms node0: -------------------------------------------------------------------------- 1 alarms currently active Alarm time Class Description 2012-06-19 19:51:11 UTC Major PEM 0 Output Failure node1: -------------------------------------------------------------------------- 1 alarms currently active Alarm time Class Description 2012-06-19 20:07:36 UTC Major PEM 0 Output Failure I don't know where I can find the solution. How can I solve the problem about routing process doesn't work ? Thanks Roland _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp