You'll want to make sure that your switches aren't quashing things as well. igmp snooping on various vendor hardware usually makes my head hurt. I suggest allowing broadcast flood for multicast to prove that your multicast router is functioning properly and then locking down your igmp config going forward.
Also, a test case like streaming with VNC over multicast is a good way to prove that services are working. Other things often have a ttl of 1, making it difficult to assess. On Jun 22, 2012, at 9:37 AM, Spam wrote: > Hello All, I've been trying to get multicast routing between 2 vlans on my > SRX240 working > so the Apple Mac's on both vlans can see each other and use their respective > services. > > I have read many articles but still haven't gotten it to work. I'm sure I'm > just missing 1-2 > commands. I also do not want to do this via DNS tricks as that is a pain in > the ass to admin. > I'd like to set it up once in one location(device) and be done with it.. > > Here are the configs for the various interfaces/parts of Multicast routing. > Any idea how to get this working. I'm pulling whats left of my hair out here > :-) > > Spammy > > ====================================================== > protocols { > igmp { > interface vlan.666 { > version 3; > } > interface vlan.1002 { > version 3; > } > interface fxp0.0 { > disable; > } > } > pim { > rp { > local { > address 10.0.0.2; > } > } > interface vlan.666 { > mode dense; > } > interface vlan.1002 { > mode dense; > } > } > } > ============= > Outputs > ============= > show pim interfaces > ------------------------------------ > Instance: PIM.master > Name Stat Mode IP V State NbrCnt JoinCnt(sg) JoinCnt(*g) > DR address > ppd0.32769 Up Sparse 4 2 P2P 0 0 > 0 > vlan.1002 Up Dense 4 2 DR 0 1 > 0 172.26.102.1 > vlan.666 Up Dense 4 2 DR 0 8 > 0 10.0.0.1 > . > show igmp interface > ------------------------------------ > Interface: vlan.666 > Querier: 10.0.0.1 > State: Up Timeout: None Version: 3 Groups: 12 > Immediate leave: Off > Promiscuous mode: Off > Passive: Off > Interface: vlan.1002 > Querier: 172.26.102.1 > State: Up Timeout: None Version: 3 Groups: 4 > Immediate leave: Off > Promiscuous mode: Off > Passive: Off > Configured Parameters: > IGMP Query Interval: 125.0 > IGMP Query Response Interval: 10.0 > IGMP Last Member Query Interval: 1.0 > IGMP Robustness Count: 2 > Derived Parameters: > IGMP Membership Timeout: 260.0 > IGMP Other Querier Present Timeout: 255.0 > ------------------------------------ > show configuration interfaces vlan.666 > description "Network: Old 10.x Network"; > family inet { > address 10.0.0.1/22; > ------------------------------------ > show configuration interfaces vlan.1002 > description "Network: WLAN"; > family inet { > address 172.26.102.1/24; > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp