Lookup route-based VPN's at Juniper's site, that will give you everything you need for that side. For the Linux side the details depend on your distro, but in general it's simple and straight forward, just remember to turn on ip_forward and setup firewall rules appropriately (by default f/ex you'll be able to route packets into the VPN from anywhere...source routed packets = bad in this case)
On Fri, Oct 26, 2012 at 6:35 AM, bizza <biz...@gmail.com> wrote: > Hi, > I need to configure a lan 2 lan vpn between a srx and a rhel server. > There is anything I need to know before starting? > Does anyone has a production l2l and could share the config snippet? > > Regards > Marco > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp -- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp