Hello, There is something I don't understand. There is a SRX650 running BFD for OSPF sessions. BFD is working, however I wanted to make sure that it is processed in PFE. All counters of "show pfe statistics traffic protocol bfd" are zero, but BFD-related counters of "show pfe statistics traffic" are on-zero and increasing. What might be the reason of such difference?
thanks Nick OS: 10.4R4.5 BFD is running on ge-0/0/1 Here is the output of "show pfe statistics traffic protocol bfd": BFD protocol statistics: Packets with invalid interface : 0 Packets with invalid address family : 0 Packets with bad IP checksum : 0 Packets with bad IP options : 0 Packets with bad IP length : 0 Packets with bad udp checksum : 0 Packets with bad udp length : 0 Packets with bad udp ports : 0 Packets with no logical interface : 0 Packets with prefix length mismatch : 0 Packets received : 0 Packets absorbed : 0 Packets failed to transmit : 0 Packets receive failures : 0 Packets allocation failures : 0 And here is the output of "show pfe statistics traffic": Packet Forwarding Engine traffic statistics: Input packets: 53237611735 5350 pps Output packets: 80428514254 7630 pps Packet Forwarding Engine local traffic statistics: Local packets input : 38162325 Local packets output : 37968315 Software input control plane drops : 0 Software input high drops : 0 Software input medium drops : 1088 Software input low drops : 0 Software output drops : 0 Hardware input drops : 0 Packet Forwarding Engine local protocol statistics: HDLC keepalives : 0 ATM OAM : 0 Frame Relay LMI : 0 PPP LCP/NCP : 0 OSPF hello : 1434683 OSPF3 hello : 0 RSVP hello : 0 LDP hello : 0 BFD : 26625331 IS-IS IIH : 0 LACP : 0 ARP : 7093341 ETHER OAM : 0 Unknown : 0 Packet Forwarding Engine hardware discard statistics: Timeout : 0 Truncated key : 0 Bits to test : 0 Data error : 0 Stack underflow : 0 Stack overflow : 0 Normal discard : 20239282 Extended discard : 0 Invalid interface : 0 Info cell drops : 0 Fabric drops : 0 Packet Forwarding Engine Input IPv4 Header Checksum Error and Output MTU Error statistics: Input Checksum : 0 Output MTU : 0 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp