Hi, My new MX5 died today. If I try to boot it up, it stuck at following message.
U-Boot 1.1.6 (Jun 10 2011 - 00:50:30) CPU: 8572, Version: 2.1, (0x80e00021) Core0: E500, Version: 3.0, (0x80210030) Clock Configuration: CPU0:1333 MHz, CPU1:1333 MHz, CCB: 533 MHz, DDR: 267 MHz (533 MT/s data rate) (Synchronous), LBC: 33 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: MX5-T 1.8 CPLD: Version 0x1f DRAM: Initializing - DDR: 2048 MB Testing DRAM from 0x00000000 to 0x80000000 DRAM test phase 1: DRAM test fails at: 7ff63e24 hang at function = 0xfffbe504 ### ERROR ### Please RESET the board ### Any suggestions? Regards, *Ali Sumsam CCIE* *Network Engineer - Level 3* eintellego Pty Ltd a...@eintellego.net ; www.eintellego.net Phone: 1300 753 383 ; Fax: (+612) 8572 9954 Cell +61 (0)410 603 531 facebook.com/eintellego PO Box 7726, Baulkham Hills, NSW 1755 Australia The Experts Who The Experts Call Juniper - Cisco – Brocade - IBM _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp