In theory it should be possible. The best thing todo is configure it and do a commit check and see what happens.
On Thu, Nov 29, 2012 at 3:07 AM, Riccardo S <dim0...@hotmail.com> wrote: > > Mates > any other experience in regards on the initial question ? > > Tks > > Date: Wed, 28 Nov 2012 11:00:59 +0100 > Subject: Re: [j-nsp] LAG on Ex4200 fiber + copper > From: dariu...@gmail.com > To: dim0...@hotmail.com > CC: juniper-nsp@puck.nether.net > > As far as I know and according to all Juniper docs you can only use > optical pic ports and of course the dedicated vc port for this > eg. > > https://www.juniper.net/techpubs//en_US/junos/topics/example/virtual-chassis-ex4200-link-aggregation-over-extended-vcps.html > > Regards,Darius > > On Wed, Nov 28, 2012 at 10:28 AM, Riccardo S <dim0...@hotmail.com> wrote: > > > > > > > > On ex-4200-24T > > is it possible to create a LAG using a 1 Gb up-link fiber port + a 1 Gb > copper > > port ? > > > > > > Any juniper.net > > reference about that ? > > > > > > Tks > > > > > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp