Hi All, I am moving from Cisco to Juniper MX5. My Cisco router was sending netflow information to a server(NFSEN). I cant see any update on the same server from my MX5 router, after we have done the migration. Following are the Cisco and Juniper configs.
Cisco: ip flow-export version 5 origin-as ip flow-export destination 10.3.3.3 9995 interface GigabitEthernet5/0.3 encapsulation dot1Q 3 ip address 10.1.1.1 255.255.255.252 ip flow ingress Juniper: set forwarding-options sampling input rate 100 set forwarding-options sampling family inet output flow-server 10.3.3.3 port 9995 set forwarding-options sampling family inet output flow-server 10.3.3.3 version 5 set forwarding-options sampling family inet output flow-server 10.3.3.3 autonomous-system-type origin set interfaces ge-1/1/1 unit 24 family inet sampling input *Ali Sumsam CCIE* *Network Engineer - Level 3* eintellego Pty Ltd a...@eintellego.net ; www.eintellego.net Phone: 1300 753 383 ; Fax: (+612) 8572 9954 Cell +61 (0)410 603 531 facebook.com/eintellego PO Box 7726, Baulkham Hills, NSW 1755 Australia The Experts Who The Experts Call Juniper - Cisco – Brocade - IBM _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp