Yes, Auto-RP in the VRF should work. It's been a while since I've done Rosen configs, but try removing the "vpn-tunnel-source" from the PIM config in your VRF.
--Stacy On Dec 10, 2012, at 10:14 AM, Peder Bach <pederb...@gmail.com> wrote: > Thanks! It works :-) > > > Should this also work in the vrf? > > > Global: > > pe...@ar100.nn# run show pim rps > Instance: PIM.master > > address-family INET > RP address Type Mode Holdtime Timeout Groups Group prefixes > 10.224.0.255 auto-rp sparse 181 175 1 224.0.0.0/4 > > > pe...@ar100.nn> show pim rps instance iptv > Instance: PIM.bynett > > address-family INET > > address-family INET6 > > We should get another RP. > > > [edit routing-instances iptv] > pe...@ar100.nn# show > instance-type vrf; > interface ge-0/0/0.0; > interface lo0.1; > route-distinguisher 65339:50; > provider-tunnel { > pim-asm { > group-address 239.1.1.1; > } > } > vrf-target target:65339:50; > vrf-table-label; > protocols { > pim { > dense-groups { > 224.0.1.39/32; > 224.0.1.40/32; > } > vpn-tunnel-source 10.224.0.96; > vpn-group-address 239.1.1.1; > rp { > auto-rp discovery; > } > } > interface lo0.1 { > mode sparse-dense; > } > interface ge-0/0/0.0 { > mode sparse-dense; > } > } > } > > >> Add this to your config: >> >> [edit protocols pim] >> user@host# set dense-groups 224.0.1.39/32 >> user@host# set dense-groups 224.0.1.40/32 >> >> Further info can be found here: >> http://www.juniper.net/techpubs/en_US/junos12.2/topics/topic-map/mcast-pim-auto-rp.html >> _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp