Hi Ali, You should be able to use the 'show interfaces <interface-name> extensive command. Full DSL statistics are included in this output.
http://www.juniper.net/techpubs/software/junos-security/junos-security10.2/junos-security-swconfig-interfaces/jd0e20123.html HTH, Graham On Wednesday, February 27, 2013, Ali Sumsam wrote: > Hi, > Does anyone know the equivalent of Cisco commands "show dsl interface" in > Junos. > I want to see the speed of DSL. > > Regards, > *Ali Sumsam CCIE* > *Network Engineer - Level 3* > eintellego Pty Ltd > a...@eintellego.net <javascript:;> ; www.eintellego.net > > Phone: 1300 753 383 ; Fax: (+612) 8572 9954 > > Cell +61 (0)410 603 531 > > facebook.com/eintellego > PO Box 7726, Baulkham Hills, NSW 1755 Australia > > The Experts Who The Experts Call > Juniper - Cisco – Brocade - IBM > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net <javascript:;> > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Graham Brown Twitter - @mountainrescuer <https://twitter.com/#!/mountainrescuer> LinkedIn <http://www.linkedin.com/in/grahamcbrown> _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp