Is this an 

Bjørn Tore @ mobil

Den 13. mars 2013 kl. 23:40 skrev snort bsd <snort...@yahoo.com.au>:

> hi all:
> 
> i have a cisco 3750 fastethernet switch connecting to a juniper 4200, with 
> portchannel on cisco side and aggregated interface juniper side. the cisco 
> side shows as "connected" but juniper side remain down. could anyone give me 
> some ideas? no lacp activated on both side.
> 
> for cisco:
> 
> cisco-3750#sh int fast1/0/9
> FastEthernet1/0/9 is up, line protocol is up (connected)
>   Hardware is Fast Ethernet, address is 0018.b99f.5d8b (bia 0018.b99f.5d8b)
>   MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, 
>      reliability 255/255, txload 1/255, rxload 1/255
>   Encapsulation ARPA, loopback not set
> 
> cisco-3750#sh interfaces por10 
> Port-channel10 is up, line protocol is up (connected)
>   Hardware is EtherChannel, address is 0018.b99f.5d8c (bia 0018.b99f.5d8c)
>   MTU 1500 bytes, BW 200000 Kbit, DLY 100 usec, 
>      reliability 255/255, txload 1/255, rxload 1/255
>   Encapsulation ARPA, loopback not set
>   Full-duplex, 100Mb/s, link type is auto, media type is unknown
>   input flow-control is off, output flow-control is unsupported 
>   Members in this channel: Fa1/0/9 Fa1/0/10 
> 
> 
> interface Port-channel10
>  switchport access vlan 100
>  switchport mode access
> 
> interface FastEthernet1/0/9
>  switchport access vlan 100
>  switchport mode access
>  switchport nonegotiate
>  channel-group 10 mode on
> 
> 
> for juniper:
> 
> user@4200-1# run show interfaces terse ge-0/0/9    
> Interface               Admin Link Proto    Local                 Remote
> ge-0/0/9                up    down
> ge-0/0/9.0              up    down aenet    --> ae1.0
> 
> user@4200-1# run show interfaces ae1 terse 
> Interface               Admin Link Proto    Local                 Remote
> ae1                     up    down
> ae1.0                   up    down eth-switch
> 
> 
> user@4200-1# show interfaces ge-0/0/9    
> ether-options {
>     no-auto-negotiation;
>     link-mode full-duplex;
>     speed {
>         100m;
>     }
>     802.3ad ae1;
> }
> 
> user@4200-1# show interfaces ae1 
> 
> ae1 {
>     aggregated-ether-options {
>         minimum-links 1;
>         link-speed 100m;
>     }
>     unit 0 {
>         family ethernet-switching {
>             port-mode access;
>         }
>     }
> }
> 
> 
> _dave
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to