ipsecuritas is a nice mac client. Free too. I used it all the time with ssgs, but haven't gotten around to making a SRX config. It allows for split routing too.
On Jul 14, 2013, at 11:39 PM, Doug McIntyre <mer...@geeks.org> wrote: > On Mon, Jul 15, 2013 at 12:59:18PM +1000, Ali Sumsam wrote: >> Is it possible to connect Dynamic VPN to Juniper SRX100 from my MAC? >> Can I dial directly from my Mac's dialer, if I dont want to use Junose >> Pulse. > > The Mac "dialer" is L2TP over IPSec, so the SRX would need to support > that set of standards if you wanted to do that. But the SRX doesn't > support L2TP over IPSec at all AFAIK. > > If you don't want to use Junos Pulse, I'd recommend buying > VPN Tracker for the Mac. Excellent IPSec VPN client. Works no-matter-what > for just about any IPSec VPN setup. Easy to setup, easy to use. > But, it costs $$$. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp