Dear all, I have a very curious problem with some box running JunOS 12.3, DPC-based:
I have one interface towards some upstream provider and want to generate cflow for in- and outbound direction and have the following configuriation: teichhorn@somerouter# show forwarding-options sampling { input { rate 2048; run-length 0; max-packets-per-second 4096; } family inet { output { flow-active-timeout 60; flow-server a.a.a.a { port 9000; autonomous-system-type origin; source-address (ip lo0); version 5; } } } } teichhorn@somerouter# show interfaces xe-0/3/0 description "TRANSIT - XXX"; unit 0 { family inet { sampling { input; output; } address c.c.c.c; } family inet6 { address a:b:c:d::1/128; } } (It doesn't matter if I use family inet sampling or a firewall filter) All the flows which are exported only contains the outbound packets, but no inbound ones. Has anyone seen that before or has a hint? I would like to open a case the next days but like to hear your opinion before... (And no, I can't simply put output sampling on the other interfaces, since there is MPLS forwarding on them active...) Thanks, Tom _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp