Depends a lot of which flavor you have with what memory This RE came with either 246M or 768M of memory and an 80MB flash
Note: For M-series, MX-series, and T-series routing platforms, the CompactFlash card memory requirement for JUNOS software Release 9.0 is 1 GB. For M7i and M10i routing platforms with only 256 MB of memory, see the Customer Support Center JTAC Technical Bulletin PSN-2007-10-001: https://www.juniper.net/alerts/viewalert.jsp?txtAlertNumber=PSN-2007-10-001&actionBtn=Search. Hope this helps On Sep 10, 2013, at 2:49 PM, N. Max Pierson <nmaxpier...@gmail.com> wrote: Hi list, I have a couple of old m10s with re-333s in them and I would like to upgrade them to whatever the last version of Junos code they can run. These are lab routers and not production. Can someone point me in the right direction? I've seen a few folks say 10.4 will work, but I only see the m120, m160, m320 etc on the downloads page. I assume the m120 image would work in this case? Thanks All! _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp