Hi there, Check out the 13.1 release notes: Configure subscriber interfaces over pseudowire terminations. Well. They didn't mention VPLS though. Please let me know if this helps.
/Evgeny ________________________________________ From: juniper-nsp [juniper-nsp-boun...@puck.nether.net] on behalf of William Jackson [william.jack...@gibtele.com] Sent: Tuesday, September 17, 2013 4:39 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] Junos BNG PPPoE inside a VPLS Gents Theoretical question here: I currently have a setup where I transport PPPoE frames between my xDSL boxes and a centralised BNG. I use one vlan tag per xDSL box aggregator box, so all the subs from a specific box have the same vlan tag. xDSL---->(vlan tagged Eth)-->PE-->MPLS Network-->PE-->(vlan tagged Eth)-->BNG(PPPoE) Termination. This means that the mpls service I use to send my PPPoE traffic to my centralised BNG ends on the BNGs upstream PE node, and I use a standard vlan-tagging interface between BNG and PE. I would like to extend the VPLS service to the BNG ( MX platform ), is it possible to interwork the PPPoE termination into the VPLS service? I cant seem to find anything about a type of setup like this? Thank you _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp