All,
We're trialing the EX3300 as an edge switch and there are a couple of
things we do on our current devices that I can't find an easy way to do
without making a (relatively slow) config change, commit, undo, commit
cycle - namely, blipping the ethernet link and the PoE.
The former we use to encourage devices to get a new DHCP lease, and the
latter to fix hung/crashed wireless APs and VoIP phones.
I can't see any way to do these without disabling the port or PoE via a
config change, which seems awkward - our existing kit has
operational-mode "reset/clear" commands for both. Any suggestions?
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
