We have similar traffic-levels (a bit more actually) and sample 1:100 and handle the analysis on an E3 3.0Ghz/16GB RAM/2x500GB SATA SW-RAID1 with 10G card with no problems and loads of capacity to spare.
//T On Thu, Mar 27, 2014 at 8:04 PM, Keith <kwo...@citywest.ca> wrote: > Hi. > > We just picked up some JFLOW licenses and are going to be exporting > flows from two different connections. > > Total traffic from both providers combined peaks about 3.5G down and about > 300 Meg up. > > We have an MX480 with a shiny new MPC2 and 4x10G card to install into the MX > so we will > probably need to use one of the 10G ports to export the traffic to the > analyzer box. > > What kind of specs should I be looking at for a server to analyze this much > traffic? > > Thanks, > Keith > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp -- Timh Bergström Head of System Operations +46 727 406 845 Videoplaza AB S:t Eriksgatan 46C Stockholm www.videoplaza.com Think before you print. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp