On the branch at least - if you configure an irb interface, the box will fail commit check unless it is in transparent mode and it is only useable for management
On 3 Apr 2014, at 7:05 am, Per Westerlund <p...@westerlund.se> wrote: > I'm offline right now, but last time I checked, IRBs with bridge domains (SRX > in transparent/L2 mode) were only used for management, no forwarding of > transit traffic possible. > > /Per > >> 2 apr 2014 kl. 21:46 skrev Morgan McLean <wrx...@gmail.com>: >> >> Just double checking that IRB interfaces are not able to be used for >> routing under the SRX3k and 5k series? I have a customer asking to have >> cabinets uplink directly to the SRX3600 (no cluster), which means I'd have >> to use bridge domains. >> >> But, I don't think this will even work. Am I correct? >> >> Thanks, >> Morgan >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
