Where is your PPPoE configuration (access dynamic-profiles ... ) ? May be you can start with this document http://www.juniper.net/techpubs/en_US/junos13.3/information-products/pathway-pages/subscriber-access/mpls/subscriber-management-mpls.pdf
Nitzan On Mon, Jun 2, 2014 at 5:45 PM, Brijesh Patel <brju.pa...@gmail.com> wrote: > Hello Folks, > > > > I created multiple L2circuit over interface xe-0/0/0 MX480 and Alcatel SR > 7750 . Status of l2circuts is UP. Attached configuration FYI pls. > > > > Now I am trying to emulate PPoE connection over new circuit(VCID 10000 > which is up) with using of N2X tester but session is not established. > > > > Any idea or How do I troubleshoot PPOE connection ? > > > > Many Thanks, > > > > Brijesh Patel > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp