Depending upon your configuration, you will have to choose one image. I was using 13.2r2. Mtu was 9050, after couple of interface flaps mtu value was not functional any more and i was unable to have ae link up on same configuration until i removed and re-created it. Later it was confirmed as bug after my coordination with atac.
Sent from my iPhone > On Jul 11, 2014, at 7:44 PM, "Santiago Martinez" > <santiago.martinez...@gmail.com> wrote: > > Hi Ahmed, > > I’m not too worried about the dhcp-relay (for my case) but the jumbo frames > worries me. Please can you provide mode information about it. Issues, > workaround... > > Santiago > > >> On Friday 11 July 2014 15:35:33 Iftikhar Ahmed wrote: >> Not sure about vc mode but ex9200 is a disaster when it comes to dhcp-relay >> or you have mtu configuration for jumbo frames on any interface. >> >> >> Sent from my iPhone >> >>> On Jul 11, 2014, at 7:25 PM, "Santiago Martinez" >>> <santiago.martinez...@gmail.com> wrote: >>> >>> Hi guys, >>> >>> Just wondering if anyone out there is already using the ex9200 switches. >>> Im interested on knowing about stability in virtual chassis mode. >>> >>> Also, does anyone have idea about the bw per slot with the new SF2? >>> >>> Thanks in advance. >>> >>> Have a great weekend. >>> >>> Santiago >>> _______________________________________________ >>> juniper-nsp mailing list juniper-nsp@puck.nether.net >>> https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp