Hi,
Would anyone care to share a config example that would allow outer TPID
translation between two different ports on an MX80? The scenario is
receiving q-in-q traffic from a carrier that only supports a TPID of
0x9100 on the outer tag (inner tag is still 0x8100). Our internal
network is all 0x8100 for both inner and outer tags. I would like to be
able to pass all inner vlan tags (ie I don't know what tags the customer
uses).
Thanks in advance,
Kevin
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp