> I'm running 12.2r7.7 on an MX80 and I'm seeing very high cpu on the tfeb and > fpcs. However when logging into the tfeb the CPU is 'idle' for the majority > of the time. The time reported is 100% though. It's not actually affecting > traffic forwarding. I've logged a jtac case but wondering if anyone is seeing > this. > > root@mx80> show chassis tfeb > TFEB status: > Slot 0 information: > State Online > Intake temperature 42 degrees C / 107 degrees F > Exhaust temperature 57 degrees C / 134 degrees F > CPU utilization 100 percent > Interrupt utilization 7 percent > Heap utilization 18 percent > Buffer utilization 13 percent > Total CPU DRAM 1024 MB > Start time: 2014-08-26 07:22:59 BST > Uptime: 9 days, 50 minutes, 59 seconds
Did you mean 12.3R7.7? In that case - not seeing it. From one of our MX80s running 12.3R7.7: x@y> show chassis tfeb TFEB status: Slot 0 information: State Online Intake temperature 45 degrees C / 113 degrees F Exhaust temperature 62 degrees C / 143 degrees F CPU utilization 10 percent Interrupt utilization 2 percent Heap utilization 22 percent Buffer utilization 13 percent Total CPU DRAM 1024 MB Start time: 2014-06-23 00:17:30 CEST Uptime: 73 days, 12 hours, 6 minutes, 53 seconds Steinar Haug, Nethelp consulting, sth...@nethelp.no _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
