On 10 Sep 2014, at 7:54 am, Scott Harvanek <scott.harva...@login.com> wrote:
> This is a silly/OCD question; > > I've faced this before and I can't recall how it was "prettied" up... > > If I recall there is a way to pretty up the formatting of show bgp summary; > > Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn > State|#Active/Received/Accepted/Damped... > XXX.XXX.XXX.XXX XXXXX 4463666 120866 0 0 5w3d > 9:31:20 Establ > inet.0: 272410/510233/510233/0 > > To remove the line break / fix the table formatting. I've tried adjusting > screen-width with no joy. > > Halp? There's a few ways to neaten it, but it's a case of which information you can live without: show bgp summary | except inet show bgp group summary | match l: Failing that, I just hacked up an op script to only show a summarised version from each peer - output here: https://github.com/dfex/DFEXjunoscripts/blob/master/show-bgp-neat.md Code here: https://github.com/dfex/DFEXjunoscripts/blob/master/show-bgp-neat.slax The script *should* sum all the prefixes from each RIB into a single summarised number per peer, but I haven't had a chance to test it too thoroughly yet. Feedback/Pull Requests welcome. Cheers, Ben _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp