Hi SRX running at least 12.1R1.9 will also have description available in the policy and address-book stanzas.
http://kb.juniper.net/InfoCenter/index?page=content&id=KB28624 Damien > -----Original Message----- > From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf > Of Asad Raza > Sent: Thursday, 6 November 2014 2:50 AM > To: Harri Makela > Cc: juniper-nsp@puck.nether.net > Subject: Re: [j-nsp] Firewall Policy Description !! > > Hi > > You can annotate match statement on each policy to add comments. Those > comments will show in start of each policy when you do show configuration > (without display set) > > Br > Asad > On Nov 5, 2014 6:43 PM, "Harri Makela via juniper-nsp" < > juniper-nsp@puck.nether.net> wrote: > > > > > Hi There > > > > > > > > > > is there anyway that we can add description of firewall policies. Firewall > > policy name is restricted to 63 chracters on Junos which is not sufficient > > to review the firewall policies on periodic basis. I can only add flows > > related information with policy name and description is required to add > > further details like who requested it, when it was added, quarterly review > > if this flow is required not etc. to comply with AUDIT requirements > > > > > > > > > > > > Thnaks > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp