I assume you mean a different port on the EX going down - not the ports connected to the MX.
If that is the case, you could perhaps use Uplink Failure detection, in reverse, so to say... http://kb.juniper.net/InfoCenter/index?page=content&id=KB21003 http://www.juniper.net/techpubs/en_US/junos14.2/topics/concept/uplink-failure-detection.html -----Original Message----- From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of adfjklaufao akjvlauroe Sent: Thursday, February 26, 2015 4:14 PM To: juniper-nsp Subject: [j-nsp] EX4200 L2 to MX960 L3 Hello We connect our devices to a 4200 and run layer 2 to an AE on the 960. The layer 3 is on the ae on the 960. Currently the layer 3 stays up when the physical layer port is down on the 4200. Is there a way to have the layer 3 shutdown when the physical port on the 4200 is down? Thank you _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp