Correct, I see rpf failures, however the firewall log specified on the dsc.0 interface is the reporting filter of the discarded traffic? Is there a solution to correct the problem?
Mike On Tue, Apr 7, 2015 at 1:29 PM, Chris Morrow <morr...@ops-netman.net> wrote: > > > On 04/07/2015 01:23 PM, harbor235 wrote: > > I am having issues updating interface stats via the discard interface, > dsc.0 > > > > I have successfully setup a trigger router for injecting routes I need > > discarded at the edge. > > The Edge router is a J series router (J2350) I have configured S/RTBH > > routing and I am using dsc.0 for discarded traffic, coloring, and > logging. > > > > My problem, traffic is discarded correctly, the output filter configured > on > > the dsc.0 interface correctly logs and discards the traffic. This is > > verified via the :show firewall log" cmds, but, I see no stats updates > via > > "show interface dsc.0 extensive" for the dsc.0 interface. The route for > > the discarded prefix(s) correctly points to the destination address of > the > > dsc.0 interface. What am i missing here? Should I expect traffic stats > on > > dsc.0 and the firewall log output? > > I bet you see discards on the input interface. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp