Hi Andrew,
according to
http://www.juniper.net/techpubs/en_US/junos13.2/topics/task/configuration/getting-started-els.html
<http://www.juniper.net/techpubs/en_US/junos13.2/topics/task/configuration/getting-started-els.html>
you have to use some ether-options ethernet-switch-profile tag-protocol-id,
under the interface...
Olivier
> Le 14 avr. 2015 à 15:42, Andrew Osnach <and...@osnach.kiev.ua> a écrit :
>
> Hello,
>
> I've got two QFX3500 in a virtual chassis with JunOS 13.2X51-D30.4.
>
> I've upgraded from a standalone QFX3500 with JunOS 12.3X50-D30.2 where I've
> got this statement:
>
> ethernet-switching-options {
> dot1q-tunneling {
> ether-type 0x8100;
> }
> }
>
> But after upgrading to 13.2 there's no even stanza ethernet-switching-options
> in the configuration mode, although there's a link in the documentation about
> it
> (http://www.juniper.net/techpubs/en_US/junos13.2/topics/reference/configuration-statement/ethernet-switching-options-qfx-series.html).
>
> How can I change ether-type in JunOS 13.2?
>
> Thanks in advance.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
