Le 12/05/15 10:27, Mark Tees a écrit :
l2circuit is not supported as that requires a two label stack to work. EX4200's can only switch a 1 label stack. Any traffic passed in P/LSR fashion that has more than 1 label in the stack gets dropped transparently from what I have seen, regardless of what the control plane/RE said. ccc/remote-interface-switch like in the link I sent earlier is the only way that works as far as I have seen. This is probably because of the 1:1 mapping of LSP to ccc direction.
Strange, because what I tested on Ex4550 is the opposite : l2circuit are working, ccc not. -- Raphael Mazelier _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
