Hi David, any suggestions about the SE config part ? I tried both in dot1q and dot1q tunnel, on the port.
Olivier > Le 9 juil. 2015 à 23:19, david....@orange.com a écrit : > > Hello > > Here my config on MX which works with SE routers: > > > xe-19/0/2 { > vlan-tagging; > mtu 4488; > encapsulation flexible-ethernet-services; > unit 1668 { > encapsulation vlan-ccc; > vlan-id 1668; > input-vlan-map pop; > output-vlan-map push; > } > l2circuit { > neighbor X.X.X.X { > interface xe-19/0/2. 1668{ > virtual-circuit-id 1668; > encapsulation-type ethernet; > } > } > } > > David Roy > IP/MPLS NOC engineer - Orange France > Ph. : +33 2 99 28 57 66 > Mob. : +33 6 85 52 22 13 > SkypeID : davidroy.35 > david....@orange.com > > JNCIE x3 (SP #703 ; ENT #305 ; SEC #144) > > > -----Original Message----- > From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of > Olivier Benghozi > Sent: jeudi 9 juillet 2015 22:07 > To: redback-...@puck.nether.net; juniper-nsp > Subject: [j-nsp] L2VPN between Juniper MX and SmartEdge > > Hi guys, > > any clue about interoperability issue between Juniper (some MX in JunOS > 13.3R5, MPC cards) and Redback (SE600, SEOS 12.1.1.9, PPA3 20x1GE card) about > L2VPN pseudowire, Martini style (using LDP signaling and LDP LSP) ? > > I'm trying to use such feature to forward a vlan between some equipments > plugged to those two routers; the tunnel is up, packets flow from the Redback > dot1q pvc to the stuff plugged behind the MX vlan-tagged unit (in family > vlan-ccc), but in the other direction, the SmartEdge keeps saying "packets > sent: 0" on the physical port... > > > Thanks. > Olivier > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _________________________________________________________________________________________________________________________ > > Ce message et ses pieces jointes peuvent contenir des informations > confidentielles ou privilegiees et ne doivent donc > pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu > ce message par erreur, veuillez le signaler > a l'expediteur et le detruire ainsi que les pieces jointes. Les messages > electroniques etant susceptibles d'alteration, > Orange decline toute responsabilite si ce message a ete altere, deforme ou > falsifie. Merci. > > This message and its attachments may contain confidential or privileged > information that may be protected by law; > they should not be distributed, used or copied without authorisation. > If you have received this email in error, please notify the sender and delete > this message and its attachments. > As emails may be altered, Orange is not liable for messages that have been > modified, changed or falsified. > Thank you. > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp