You can do a transparent proxy type setup. Using the firewall filter syntax to change the next hop to a properly configured Linux, FreeBSD, or whatever host.
On Wednesday, August 5, 2015, Markus <unive...@truemetal.org> wrote: > Hi list, > > I'm looking for someone to create the following config on an M7i with > 12.3R2.5 for me: > > Several source addresses on the LAN should not be able to contact port 25 > on the internet, but instead all these connections should be relayed > through an external mail relay. > > I can't seem to figure it out by myself. Not sure if I even need NAT or > not. > > Anyone available to do this paid & rather quickly? Please contact me > off-list. > > Thank you! > Markus > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- "Genius might be described as a supreme capacity for getting its possessors into trouble of all kinds." -- Samuel Butler _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp