Hi Farid :) Yes, but was assuming we talk about 48T, so only 10G as far as I know, no way to negociate 1G.
Vincent 2015-11-05 10:54 GMT+01:00 Bouzemarene, Farid (ATS) < farid.bouzemar...@avnet.com>: > Hi vincent ;) > > QFX support 1g also but you have to use 1g SFP ! > > I had no luck with Cisco or other vendors optics but with juniper ( or > solidoptics / juniper ) there is no problem . > > Farid > > -----Original Message----- > From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf > Of Vincent Clement > Sent: mercredi 4 novembre 2015 19:12 > To: Michael Loftis > Cc: juniper-nsp@puck.nether.net > Subject: Re: [j-nsp] LACP on mixed virtual chassis QFX5100/EX4300 > > Hello, > > Pretty sure QFX in 10G only, so if you want to achieve that, you'll have > to use a uplink module to have 10G on 4300 side. > > Vincent > > 2015-11-04 2:23 GMT+01:00 Michael Loftis <mlof...@wgops.com>: > > > I'd take a closer look at show interfaces. When a link is 1gig QFX > > calls it ge-. So you can have an ex-0/0/1 and a ge-0/0/1 but only one > > is active as I do not believe tri rate SFP+ is supported. > > > > On Tuesday, November 3, 2015, ThienDuc Nguyen > > <thienduc.ngu...@zayo.com> > > wrote: > > > > > Hi > > > > > > I was trying to create a LACP bundle between two ports : one on a > > > EX4300, the other on a QFX5100. > > > Both link have their speed negotiated at 1GE (but the interface name > > > on > > the > > > QFX is xe-, I can't force it to ge-, and their are no way to force > > > the speed on the QFX). > > > if I set the lacp speed to 1ge, the configuration can't commit > > > because it sees the QFX interface as a 10G interface... > > > > > > > > > Is their a special knob to activate it, or I need to create LACP on > > > the same device family ? (the version is 14.1X53-D30.3) > > > > > > Thanks, > > > > > > *Thien Duc Nguyen* > > > _______________________________________________ > > > juniper-nsp mailing list juniper-nsp@puck.nether.net <javascript:;> > > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > > > > -- > > > > "Genius might be described as a supreme capacity for getting its > > possessors into trouble of all kinds." > > -- Samuel Butler > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > -- > Vincent Clément > +33 6 74 49 66 30 > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Vincent Clément +33 6 74 49 66 30 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp