Hello, So i am running a MX with 11.2 and have finally been able to schedule a long overdue software upgrade. Issue is the oldest still available on Junipers site is 12.3. I understand the recommended upgrade paths would prefer i go to 11.4 first, then 12.3 then to 13.3 which is where i would like to end up.
My question is, can i go from 11.2 to 12.3 or even direct to 13.3 without breaking anything? What are my risks? Configuration and features are very basic. Thanks in advance. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
