On 1/13/16 8:59 AM, Colton Conor wrote: > Just to confirm though, its the extra RE that is different and not > supported in this config right? The MX960 can use 3 SCB's at once, but only > 2 REs? Or do I have the wrong too?
An mx960 has a full fabric with two SCBs. it is n+1 redundant with 3. e.g. at that point you can swap one without cutting the fabric bandwidth in half. NSR/GRES uses two REs. a third RE in the chassis is cold and dead. iI's probably an acceptable place to store a spare. > > > > On Wed, Jan 13, 2016 at 8:16 AM, Mark Tinka <mark.ti...@seacom.mu> wrote: > >> >> >> On 13/Jan/16 12:42, Jérôme Nicolle wrote: >> >>> Looks like the broker had a few spare SCB and REs and no functionnal >>> chassis to slap them in, so he invented a bundle and didn't fully test >> it. >> >> If the price is right, I'd take the extra RE and SCB as backup, in case >> not including them does not yield any significant saving. >> >> Mark. >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp >
signature.asc
Description: OpenPGP digital signature
_______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp