Hey everyone-- I'm trying to set up a GRE tunnel on an EX4500 running 12.3R9.4, and I'm running into some basic trouble. This page does a pretty basic setup: http://www.juniper.net/documentation/en_US/junos15.1/topics/task/configuration/gre-tunnel-services-cli.html
But when I start to issue this command : #set chassis fpc 0 pic 0 tunnel-port port-number tunnel-services I don't get the "tunnel-port" option. It's not available, per the below: root# set chassis fpc 0 pic 0 ? Possible completions: + apply-groups Groups from which to inherit configuration data + apply-groups-except Don't inherit configuration data from these groups no-multi-rate Disable multi-rate mode > q-pic-large-buffer Run in large delay buffer mode > sfpplus Sfpplus configuration option {master:0}[edit] root# set chassis fpc 0 pic 0 Clearly I'm doing something wrong. Can anyone point me in the right direction? Google is failing me (or I'm failing Google, which is probably closer to the truth). Thanks much. --Dave Peters _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp