* Chuck Anderson <c...@wpi.edu> [2016-01-26 05:24]: > I recommend 4 x 208V. The MX960 uses "power zones" in a 2+2 > arrangement where half of the chassis is powered by 2 PEMs, and the > other half of the chassis is powered by the other 2 PEMs. Make sure > the 1st PEM for each zone is powered by the A feed, and the 2nd PEM > for each zone is powered by the B feed. For dual-input PEMs, you > should put both inputs of a single PEM on the same branch circuit, > either A or B.
Hi Chuck, why would one want to put both inputs on the same circuit? That kind of defeats the purpose in my mind. Are there caveats? Regards Sebastian -- GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE. -- Terry Pratchett, The Fifth Elephant _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp