On 26/Jan/16 06:20, Chuck Anderson wrote:
> I recommend 4 x 208V. The MX960 uses "power zones" in a 2+2 > arrangement where half of the chassis is powered by 2 PEMs, and the > other half of the chassis is powered by the other 2 PEMs. Make sure > the 1st PEM for each zone is powered by the A feed, and the 2nd PEM > for each zone is powered by the B feed. For dual-input PEMs, you > should put both inputs of a single PEM on the same branch circuit, > either A or B. My understanding of power zoning on the MX960 is that the normal-capacity AC power supplies are not zoned, while the high-capacity AC power supplies are zoned. Mark. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
