Hey Matt, we have couple of EX2200 VC running in our infra. JUNOS version 12.3R3.4.
Few things to keep in mind: 1. JUNOS should be same on both switch 2. Make your VC as 'preprovisioned', so that 'you' can decide what part the new member will play in VC. http://www.juniper.net/techpubs/en_US/junos13.2/topics/task/configuration/virtual-chassis-ex2200-cli.html 3. configure the ethernet ports to act as VC-ports, as 2200 do not have any fixed VCP. It can be the built-in ports or ports from uplink module. http://www.juniper.net/techpubs/en_US/junos13.2/topics/task/configuration/virtual-chassis-ex2200-setting-vcp.html Understanding EX2200 VC: http://www.juniper.net/documentation/en_US/junos12.3/topics/concept/virtual-chassis-ex2200-virtual-chassis-understanding.html Hope this helps. ________________________________________ From: juniper-nsp <juniper-nsp-boun...@puck.nether.net> on behalf of Raphael Mazelier <r...@futomaki.net> Sent: Wednesday, February 3, 2016 7:24 PM To: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] Juniper EX2200 virtual-chassis On Ex2200 a standalone switch is already part of a virtual chassis. You have to configure two VC ports, and to preprovision the other member as backup (or linecard), it will boot and join the actual vc, without interruption. Be sure to have a backup of the configuration in case of disaster :) -- Raphael Mazelier Le 03/02/2016 14:34, Matthew Crocker a écrit : > > Hello, > > I have an EX-2200 in production and would like to add another to create a > virtual-chassis. The current production unit will be the master and the > new unit will be the backup. Does creating a virtual-chassis cause a RE > reset? Will my production traffic take a hit? > > Thanks > > -Matt _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp