I love my bgp route reflector cluster... all my pe's neighbor with 2 bgp rr cluster members... anytime I want to add an address family to a pe, I add it to one rr cluster neighbor session, it bounces, once routes have been relearned over it, I add the af to the other rr neighbor session... No outage on pe. Love it
Aaron -----Original Message----- From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of tim tiriche Sent: Thursday, February 18, 2016 12:44 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] Enable EVPN on existing mpls l3vpn network Hello, I have an existing L3VPN network with NSR. If i want to enable EVPN, is it just a matter of enabling family evpn signalling on the bgp neighbors? Will doing so, cause a session reset or affect existing production services or something else i need to be aware of? this will be on the junos recommended 13.3R8 code. I read NSR is not supported for EVPN. If i enable family evpn signalling will NSR be supported for existing l3vpn functionality? -Tim _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp