Thanks Daniel, when I don't use the input/output vlan maps, here's what happens when I try to put ge-0/0/38 vlan tags 10 and 17 into the same vlan...
set interfaces ge-0/0/38 flexible-vlan-tagging set interfaces ge-0/0/38 encapsulation flexible-ethernet-services set interfaces ge-0/0/38 unit 10 encapsulation vlan-bridge set interfaces ge-0/0/38 unit 10 vlan-id 10 set vlans vlan10 interface ge-0/0/38.10 set interfaces ge-0/0/38 flexible-vlan-tagging set interfaces ge-0/0/38 encapsulation flexible-ethernet-services set interfaces ge-0/0/38 unit 17 encapsulation vlan-bridge set interfaces ge-0/0/38 unit 17 vlan-id 17 set vlans vlan10 interface ge-0/0/38.17 agould@eng-lab-5048-1# commit [edit vlans vlan10] 'interface ge-0/0/38.17' l2ald ACX: On a bd, for each ifd only one ifl can be added [edit vlans] Failed to parse vlan hierarchy completely error: configuration check-out failed {master:0}[edit] -----Original Message----- From: dverl...@gmail.com [mailto:dverl...@gmail.com] On Behalf Of Daniel Verlouw Sent: Thursday, April 21, 2016 1:36 PM To: Aaron <aar...@gvtc.com> Cc: juniper-nsp List <juniper-nsp@puck.nether.net> Subject: Re: [j-nsp] ACX5048 - vlan-map conflict with routing-instance with vlan-id tags Hi Aaron, On Thu, Apr 21, 2016 at 7:48 PM, Aaron <aar...@gvtc.com> wrote: > [edit vlans vlan10 interface] > 'ge-0/0/38.17' > interface with input/output vlan-maps cannot be added to a > routing-instance with a vlan-id/vlan-tags configured > error: commit failed: (statements constraint check failed) The error msg is pretty clear :) did you try my first suggestion which was simply to remove the input/output-vlan-maps ? So: set interfaces ge-0/0/38 flexible-vlan-tagging set interfaces ge-0/0/38 encapsulation flexible-ethernet-services set interfaces ge-0/0/38 unit 17 encapsulation vlan-bridge set interfaces ge-0/0/38 unit 17 vlan-id 17 set vlans vlan10 interface ge-0/0/38.17 set vlans vlan10 l3-interface irb.10 set vlans vlan10 vlan-id 10 I'm fairly sure this worked when we PoC'd it (don't have my notes handy, and we didn't go for the ACX5k in the end, so can't try it again). The interface is automatically config'd for a vlan swap to/from vlan 10 in this case. -- Daniel. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp