Hi, This is a solution to your problem:
http://www.juniper.net/documentation/en_US/junos15.1/topics/reference/configuration-statement/family-edit-protocols-bgp-route-target-vp.html Give it a try first in a lab test first. If you use RR you should copy its loopback address to inet.3 on all PEs. HTH, Ivan, On Wed, Sep 28, 2016 at 11:01 AM, Johan Borch <johan.bo...@gmail.com> wrote: > Hi > > Lets say i have two PE-routers, router1 and router2. > > They run MP-BGP, MPLS and so on, the usual stuff. I have one VRF with a lot > of routes in (DFZ). Router2 is not importing the vrf-target for this VRF. > My problem is that router2 is dead slow and even if I'm not importing this > perticual vrf-target it still takes ages to go through all routes, can I > somehow limit what router1 sends to router2 in the bgp.l3vpn.0 table? > > Johan > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Best Regards! Ivan Ivanov _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp