We saw a limitation around 40Gbps when running MX80 with RE based jflow (inline works good ) we didnt got good explanation why it limit the traffic so try to disable some features and see if it help
Nitzan On Mon, Mar 20, 2017 at 6:14 AM, Javier Rodriguez <rodriguezsot...@gmail.com > wrote: > Mmm no, I think it doesn't work on MX80 / MX104. > > JR. > > > 2017-03-19 23:14 GMT-03:00 Olivier Benghozi <olivier.bengh...@wifirst.fr>: > > > What about bypass-queuing-chip on MIC interfaces ? Would it work on > > MX80/104 ? > > > > > On 20 march 2017 at 01:32, Saku Ytti <s...@ytti.fi> wrote : > > > > > > Ok that's only 31Gbps total, without having any actual data, my best > > > guess is that you're running through QX. Only quick reason I can come > > > up for HW to limit on so modest traffic levels. > > > > > > On 20 March 2017 at 02:25, Javier Rodriguez <rodriguezsot...@gmail.com > > > > wrote: > > >> Soku, > > >> > > >> Maybe there was a misunderstanding , the inbound traffic on fpc2's LAG > > was > > >> 4Gbps , and the outbound traffic was 27Gbps aprox. That outbound > traffic > > >> enters by the fpc1 and fpc0. > > >> It's IMIX traffic, the average packet size is 1250Bytes (out) 200Bytes > > (in). > > >> I tried to see dropped packets with "show precl-eng 5 statistics " and > > "show > > >> mqchip 0 drop stats" at pfe shell but it's 0. Does it save historical > > data? > > >> > > >> > > >> <--27G-- | | <--27G-- > > >> |FPC2 FPC 0/1 | > > >> --4G--> | | --4G--> > > >> > > >> Regards, > > >> > > >> Javier. > > >> > > >> > > >> 2017-03-19 20:43 GMT-03:00 Saku Ytti <s...@ytti.fi>: > > >>> > > >>> Hey, > > >>> > > >>> There aren't multiple FPCs on the box really, there is only single MQ > > >>> chip out of where all ports sit, usually MIC ports behind additional > > >>> IX chip, which is not congested. It's architecturally single linecard > > >>> fabricless box. > > >>> You're saying you're pushing on the 4x10GE fixed ports 31+31Gbps, > e.g. > > >>> 62Gbps? It might be possible on (perhaps artificially) unfortunate > > >>> cell alignment that it could be congested on so low values. Are all > > >>> the packets same size, i.e is this lab scenario or just IMIX traffic? > > >>> MQ pfe exceptions and MQ=>LU counters might be interesting to see. > > >>> > > >>> If you use QX chip, 62Gbps would be really good, QX chip is not > > >>> dimensioned for line rate _unidir_ (i.e. can't do even 40Gbps). If > you > > >>> don't know if you're using QX or not, just deactive whole > > >>> class-of-service and scheduer config in interfaces. > > >>> > > >>> On 20 March 2017 at 01:26, Javier Rodriguez < > rodriguezsot...@gmail.com > > > > > >>> wrote: > > >>>> Hi, > > >>>> > > >>>> Thanks for your reply Saku. > > >>>> The problem is that fpc2 (fixed ports) can't overcome 31Gbps (in + > > out) > > >>>> with 6Mpps. The graph shows a straight line as if it were being > > limited. > > >>>> I have moved some interfaces from LAG to fpc1 and fpc0 and the > traffic > > >>>> has > > >>>> incresed. (It only has a tunnel-service in fpc0 of 1g) > > >>>> It's as if it were being limited by the MQ, but I do not see > discarded > > >>>> packages, or I do not know where to look at them. > > >>>> > > >>>> JR. > > >>>> > > >>>> 2017-03-19 6:53 GMT-03:00 Saku Ytti <y...@ntt.net>: > > >>>> > > >>>>> Hey Javier, > > >>>>> > > >>>>> > > >>>>> MX104 and MX80 (1st gen Trio MQ/LU) should do about 55Mpps and > 75Gbps > > >>>>> (in+out). > > >>>>> > > >>>>> On 19 March 2017 at 09:12, Javier Rodriguez < > > rodriguezsot...@gmail.com> > > >>>>> wrote: > > >>>>>> Hi everyone, > > >>>>>> > > >>>>>> I need a bit of your knowledge. > > >>>>>> I have a MX104 as PE router with 4 LAGs. > > >>>>>> One LAG facing to P router on FPC2 (fixed ports). The other LAGs > > >>>>>> distributed in FPC0 and FPC1. > > >>>>>> The problem is that traffic is being limited when reach 28G out/ > 4G > > >>>>>> in > > >>>>>> (31Gbps total). > > >>>>>> I changed one interface (10G) of the LAG (to P router) to FPC1 and > > >>>>>> the > > >>>>>> traffic has grown a little more. > > >>>>>> > > >>>>>> Where is the limitation? In the MQ chip? > > >>>>>> Where can I see those discarded packages? > > >>>>>> How much traffic will the router support on FPC2? > > >>>>>> Where could I get a graphic of its internal architecture? > > >>>>>> Does a MX80 have the same behavior? > > > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > -- > Atte. > > Javier I. RodrÃguez Sotelo > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp