Have you (or anyone else) happened to use Fusion with the CSD module of Junos Space?
I would expect that as ports on the Satellite devices just appear on the Aggregation device as a regular interface it would work, but it would be good to know if any one has any real world (or even lab) experience with this Shaffi -----Original Message----- From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Jackson, William Sent: 22 July 2017 11:12 PM To: aheb...@pubnix.net; Juniper List <juniper-nsp@puck.nether.net> Subject: Re: [j-nsp] MX240 (orMX960) with QFX5100 in Fusion Been looking at fusion edge with qfx5100 and ex4300. Using 16.X code and so far so good. On 19/07/2017, 21:03, "juniper-nsp on behalf of Alain Hebert" <juniper-nsp-boun...@puck.nether.net on behalf of aheb...@pubnix.net> wrote: Hi, Anyone has feedback about Fusion when MX240-MX960 and QFX5100 are concerned. Our foray into QFX5100/VCF only was not very successful. :( -- ----- Alain Hebert aheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
