I am not sure why it is not working for you (assuming you have
bi-directional LSPs in place and no other routing or filter issues), but
I do recall a previous exchange with you on this list about you possibly
using the VMX, I have seen randomly at times in the past that when using
the VMX (not sure if you are using this now or a phy router) with
logical systems and the logical tunnel interfaces that icmp tunneling
would not work or would stop working until I shutdown the CP/DP
(basically a full shutdown and startup), which is why I moved to using
the built-in interfaces with Linux Bridge as the underlying connection
as I have not yet seen that same behavior with those interfaces.
-C
On 08/24/2017 08:50 AM, Aaron Gould wrote:
Thanks Shamen,
set logical-systems r2 protocols mpls icmp-tunneling
set logical-systems r3 protocols mpls icmp-tunneling
set logical-systems r4 protocols mpls icmp-tunneling
set logical-systems r5 protocols mpls icmp-tunneling
set logical-systems r6 protocols mpls icmp-tunneling
set logical-systems r7 protocols mpls icmp-tunneling
set logical-systems r8 protocols mpls icmp-tunneling
r1 and r9 are ce’s.
-Aaron
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
