If possible try aiming for a full system restart, it will be less painful and very straightforward (you'll need at least a one hour window). Your PFEs will go through a warm reboot anyway if you upgrade the software on the new REs. But please confirm that with your SE.
On Wed, Oct 18, 2017 at 2:47 PM, craig washington <craigwashingto...@hotmail.com> wrote: > Hello all, > > > Kind of a general question but just wanted to double check any gotchas. > > > We are upgrading some of our routers from RE-S-2000 to RE-S-1800x4. > > This should just be putting the new on in the backup, letting it sync and > upgrade software as needed and then doing switch over, then performing same > step on the primary. > > Is there anything that I am missing, are there any odd issues with the > RE-S-2000 that could cause a crash of some sort? > > > Thanks > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp