* As long as you have pure p2p links, you should be fine - Juniper gear meant.
בתאריך 18 בנוב' 2017 1:20 AM, "Alex K." <nsp.li...@gmail.com> כתב: > Yes, > > But unfortunately (as far as j-nsp is considered), using Ciscos' gear. > > Cisco has a special flavor of MACSec, intended to address that issue > exactly - they call it WAN MACSes. We was able to use across many different > SP circuits. As long as you have pure p2p links (real or stimulated), you > should be fine. Unfortunately, I'm not aware of any similar Juniper > technique. > > Best regards, > Alex. > > בתאריך 27 באוק' 2017 5:23 PM, "Chuck Anderson" <c...@wpi.edu> כתב: > > Has anyone been able to run MACsec over a service provider's Ethernet > Private Line (or even just a 802.1q vlan)? I'm looking at using 10gig > ports on the EX4300 or the EX4600/QFX5100-24Q with the MACsec uplink > module. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp