That should be pretty straightforward to slap together something simple. Anyone know the actual size of the threaded hole?
Frank Sweetser Director of Network Operations Worcester Polytechnic Institute "For every problem, there is a solution that is simple, elegant, and wrong." - HL Mencken ________________________________ From: juniper-nsp <juniper-nsp-boun...@puck.nether.net> on behalf of Chuck Anderson <c...@wpi.edu> Sent: Thursday, May 3, 2018 9:39 AM To: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] Equipment Labelling Nice. That screw hole on the front of the rack ear is screaming for someone to make a 3D printed label tag. On Thu, May 03, 2018 at 08:19:59AM -0500, Chris Wopat wrote: > Our current QFX5100 label method: > > https://i.imgur.com/kRVojXk.jpg > > We have a label on both the left and right side, sticking out as a tab on > left and folded over on right. in both cases the label was adhered prior to > putting the ears on. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp