I'm using just the front part, center mounted. Works fine and is much stronger than the flimsy back part.
On Thu, Aug 02, 2018 at 11:07:20AM -0400, Colton Conor wrote: > Chuck, > > We put them in the center, and even cut them, but overall the 4 post rack > brackets that come with the QFX5100 are flimsy as hell. > > On Wed, Aug 1, 2018 at 6:09 PM, Chuck Anderson <c...@wpi.edu> wrote: > > > Just put the rack brackets back towards the middle of the sides so the > > switch is hangs further forward. The weight is more balanced and it works > > fine. > > > > On Wed, Aug 01, 2018 at 06:39:43PM -0400, Colton Conor wrote: > > > We are constantly having to mount these larger switches to two post > > racks. > > > To my knowledge Juniper does not make 2 post mounting brackets for these > > > switches. Does anyone have any recommendations on a shelf or something to > > > hold these up? We are dealing with 19 and 23 inch racks. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp