I have a pair of standalone EX4550s running 12.3R6.6 that have been stable for a few years. I have 2 EX4550-EM-2QSFPs to install one in each switch, and I understand from https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/specifications/expansion-module-ex4550.html that I will need to upgrade Junos to newer than 13.2X50-D10.
In an earlier thread this month though, it was said that 15.1R7 isn't stable on the EX4550 even though its currently recommended, so is anyone using these modules and can recommend a stable version? Are the problems with 15.1R7 on a EX4500/EX4550 relevant to a standalone configuration? OSPF and VRRP are the protocols being used, with a loop free topology. I also have a pair of EX4500s in a somewhat less production environment but same network design I'm planning to run the newer version on for a month or so first. Thanks! -Nick _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp